Firmware specifications

Last Updated : Nov 03, 2023 |
Prolog information
Metadata
Keywords:

New Comcode numbers for G450 Branch Gateway

  • 700506953 : G450 MAIN SUPERVISOR BOARD V3
  • 700506954 : G450 MAIN SUPERVISOR BOARD V3 NON GSA
  • 700506955 : G450 MP160  MEDIA  GATEWAY
  • 700506956 : G450 MP160  MEDIA GATEWAY NON GSA
  • 700506959 : G450 MP80 WITH V3 SVP BOARD
  • 700506960 : G450 MP80 WITH V3 SVP BOARD
  • 700508199 : G450 160 CHANNEL DSP daughter board
  • 700512805 : G450 V4 MAIN BOARD WITH MP160 GSA
  • 700512806 : G450 V4 MAIN BOARD WITH MP160 NON-GSA

Minimum G450 Branch Gateway firmware requirements

Firmware version
Build
v1, v2
v3
Recommended Communication Manager version
BGW 10.2
43.9.0
Yes
Yes
AA 10.2, CM 10.2
AA 10.1.x, CM 10.1.x
AA 10.1, CM 10.1
If your Branch Gateway is running Build 38.20.0 or earlier, you must install Release 7.1.0.4 Build 38.21.2 before upgrading to Build 43.9.0.
BGW 10.1.x
42.24.0
Yes
Yes
AA 10.1.x, CM10.1.x
AA 10.1, CM 10.1
AA 8.1.x, CM 8.1.x
AA 8.0.x, CM 8.0.x
If your Branch Gateway is running Build 38.20.0 or earlier, you must install Release 7.1.0.4 Build 38.21.2 before upgrading to Build 42.24.0.
BGW 10.1
42.4.0
Yes
Yes
AA 10.1, CM 10.1
AA 8.1.x, CM 8.1.x
AA 8.0.x, CM 8.0.x
You can upgrade to Release 10.1 Build 42.4.0 and later from Build 38.20.0 or earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 8.1.x
41.38.0
Yes
Yes
AA 8.1.x, CM 8.1.x
AA 8.0.x, CM 8.0.x
AA 7.1.x, CM 7.1.x
AA 7.0.x, CM 7.0.x +
You can upgrade to Release 8.1.x Build 41.24.0 and later from Build 38.20.0 or earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 8.1
41.9.0
Yes
Yes
AA 8.1, CM 8.1
AA 8.0, CM 8.0
AA 7.1.x, CM 7.1.x
AA 7.0.x, CM 7.0.x +
You can upgrade to Release 8.1 Build 41.9.0 and later from Build 38.20.0 or earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 8.0
40.10.1
Yes
Yes
AA 8.0, CM 8.0
AA 7.1.x, CM 7.1.x
AA 7.0.x, CM 7.0.x +
AA 6.3.x, CM 6.3.x +
You can upgrade to Release 8.0 Build 40.10.1 and later from Build 38.20.0 or earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 7.1.3.x
39.x.y
Yes
Yes
AA 7.0 FP 1, CM 7.0.1
AA 7.0, CM 7.0+
AA 6.2 FP 4, CM 6.3.6+
AA 7.1, CM 6.3.x, AA 7.0, CM 7.1.3
You can upgrade to Release 7.1.3 Build 39.16.0 and later 39.x.y from Build 38.20.0 and earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 7.1.2
39.x.y
Yes
Yes
AA 7.0 FP 1, CM 7.0.1
AA 7.0, CM 7.0+
AA 6.2 FP 4, CM 6.3.6+
AA 7.1, CM 6.3.x, AA 7.0, CM 7.1.2
You can upgrade to Release 7.1.2 Build 39.12.0 and later 39.x.y from Build 38.20.0 and earlier only after installing Release 7.1.0.5 Build 38.21.3.
BGW 7.1.0+
38.16.0+
Yes
Yes
AA 7.0 FP 1, CM 7.0.1
AA 7.0, CM 7.0+
AA 6.2 FP 4, CM 6.3.6+
AA 7.1, CM 6.3.x, AA 7.0
Branch Gateway requires a 7.x build (37+) to successfully upgrade to Build 38.8.0 or later. Earlier builds will fail with the Invalid file error type. If Branch Gateway is running 36.x or earlier build, you must upgrade to 37.x.y before upgrading to 38.x.y.
BGW 7.0.1.2
37.41.0     
Yes
Yes
AA 7.0 FP 1
BGW 7.0.1.1
37.39.0       
Yes
Yes
AA 7.0, CM 7.0
BGW 7.0.1
37.38.0
Yes
Yes
AA 7.0 FP 1, CM 7.0.1
AA 6.2 FP 4, CM 6.3.6
AA 7.0, CM 7.0
BGW 7.0.0.2
37.21.0
Yes
Yes
AA 7.0, CM 7.0
AA 6.2 FP 4, CM 6.3.6+
BGW 7.0.0.1
37.20.0
Yes
Yes
AA 7.0, CM 7.0
AA 6.2 FP 4, CM 6.3.6+
BGW 7.0
37.20.0
Yes
Yes
AA 7.0, CM 7.0
AA 6.2 FP 4, CM 6.3.6+
BGW 6.3.14
36.18.0       
Yes
Yes
CM 6.3.x,AA 7.0
BGW 6.3.7+
36.16.0+
Yes
Yes
AA 6.2 FP 4, CM 6.3.6+
BGW 6.3.6 JITC
36.x.y
Yes
Yes
AA 6.2 FP 4, CM 6.3.6
AA 6.2 FP3, CM 6.3.2 & CM 5.2.1 SP 16+
BGW 6.3.5
35.x.y
Yes
Yes
AA 6.2 FP3, CM 6.3.2+
AA 6.2 FP 2, CM 6.3 & CM 5.2.1 SP 16+
BGW 6.3.1
34.6.0+
Yes
Yes (min FW build 34.6.0)
AA 6.2 FP3 CM 6.3.2+ (Oct 2013)
AA 6.2 FP 2, CM 6.3 & CM 5.2.1 SP 16+
BGW 6.3
33.13.0
Yes
No (base not supported)
AA 6.2 FP2-CM 6.3 - May 2013
BGW 6.2.1
32.26.0
Yes
No (base not supported)
AA 6.2 FP1-CM 6.2 sp4 - Dec 2012