MM710B LEDs

Last Updated : Apr 02, 2020 |
Prolog information
MM710B LEDs
LED
Name
Color
Indication
ALM
Alarm
Red
The module type is not the type configured in the MSG for the slot
TST
Test
Green
Either a test is being performed on the module via the server, or the module is performing a self-test upon initial insertion
ACT
Activity
Yellow
An E1/T1 trunk device connected to the module is in use.
The light is always on if the trunk is an ISDN E1 or T1 PRI trunk, and the MM710B is not configured as the synchronization source of the Branch Gateway.
The light flashes at a rate of 2.8 seconds on and 0.2 seconds off if the MM710B synchronization source is configured to synchronize the Branch Gateway and the module is receiving a T1 source signal.
The light flashes at a rate of 0.2 seconds on and 2.8 seconds off if the MM710B synchronization source is configured to synchronize the Branch Gateway and the T1 source is lost.
SIG
Signal
Green
The physical connection is up.