Message Waiting Indication Subscriber Number Prefixes

Last Updated : Oct 29, 2012 |
Prolog information
Metadata
Keywords:
If the voice mail server is an AUDIX server connected using BX.25, you must fill in the Message Waiting Indication (MWI) Subscriber Number Prefixes to send or cancel a Message Waiting Indication to a served user. The served user is a user on the Private Telecommunication Network (PTN) to whom the MWI is sent on activation by the Message Center or Message Center PBX.
Using the QSIG MWI Supplementary Service, Message Center/Message Center PBX sends MWI Activate or MWI Deactivate message to the served user as a result of storage or retrieval of messages. Also, the served user is allowed to query the Message Center for MWI status.
Example command: change isdn mwi-prefix

AUDIX Mach ID

Prolog information
Metadata
Keywords:
Valid entry
Usage
1 to 99
AUDIX number serving the switch of the AUDIX number field from the Switch Interface Administration screen.
blank
Available only if all the other records on the screen are blank.

Inserted Digits

Prolog information
Metadata
Keywords:
Accepts up to 12 digits.
Valid entry
Usage
0 to 9
Digits prefixed to the AUDIX subscriber number to provide complete subscriber number to the Message Center PBX.
blank
No digits prefixed to the AUDIX subscriber number.

Machine ID

Prolog information
Metadata
Keywords:
Available only if Machine ID is assigned to the qsig-mwi application in the Processor Channels Communication Interface.
Valid entry
Usage
1 to 20
Unique ID associated with each processor channel qsig-mwi application

Message Center ID

Prolog information
Metadata
Keywords:
Accepts up to 20 digits. These are the Message Center ID digits to be sent a QSIG MWIActivate or MWIDeactivate message. It is necessary to enter the Message Center ID only if the system at the far-end of the QSIG connection needs it.

Routing Digits

Prolog information
Metadata
Keywords:
Accepts up to four digits.
Valid entry
Usage
0 to 9, *, #
Digits comprising the AAR or ARS access code.
blank
No Routing Digits prefixed to the AUDIX subscriber number. For example, if UDP is used to route the call.

Send QSIG Message Center ID

Prolog information
Metadata
Keywords:
Valid Entry
y
Insert a message center ID in the MWI Activate and MWI Deactivate messages. For SIP-connected messaging servers,can be administered to insert a Message Center ID over QSIG connections to other servers by entering the Message Center ID, along with the Local Node Number for thisserver, in any record of this form.
n
Does not insert the message center ID in the MWI Activate and MWI Deactivate messages.