Deploying SBC2 and SBC3 using the EMS web interface

Last Updated : Dec 19, 2025 |

About this task

This task outlines the steps required to enable A1 and B1 interfaces (and optionally A2 and B2) in the Element Management System (EMS) web interface.

Before you begin

Before enabling the interfaces, ensure that you have configured WebLM and installed a live license.

Procedure

  1. Log on to the EMS web interface from https://EMSip/login.

    Use the following credentials:

    • Username: ucsec

    • Password: ucsec

  2. Update the default password to a strong, secure one (for example, t3ch@S1t3).

    After updating the password, the screen displays the EMS dashboard.

  3. Navigate to Network Flows > Network Management > Interfaces.

    Enable interfaces A1 and B1. If required, enable A2 and B2.

  4. Click the Networks tab next to the interface settings.

    Assign the required IP configuration details to interfaces A1 and B1. If required, assign IPs to A2 and B2 interfaces, if you have enabled interfaces in the step 3.