You can deploy Avaya SBC on Avaya Solutions Platform 130 Appliance R6.0.x to support multiple topologies for both single and multiple data center environments.
The required SBC size depends only on session capacity, not on the number of switches or racks the servers use. Each topology enables you to separate management. You can also choose between VLAN or flat-LAN configurations for increased flexibility.
The following table describes the networking components for these virtualized environments:
Interface |
Type |
Transport |
Purpose |
Notes |
M1 |
Management |
VLAN over bridge0 |
EMS/SBC Management (10.10.x.x) |
Always use a VLAN. |
M2 |
HA/Sync |
VLAN over bridge0 or dedicated bridge |
Provides HA signaling. |
A direct link is optional. |
A1 |
Signaling/Media (Internal) |
Bridge → 1 GbE NIC |
Handles enterprise-side SIP and RTP. |
This interface is required. |
B1 |
Signaling/Media (External) |
Bridge → 1 GbE NIC |
Handles public/DMZ SIP and RTP. |
This interface is required. |
A2 |
High-capacity Media |
Bridge → 10/25 GbE NIC or 1 GbE NIC |
Supports additional media sessions. |
Use for high-session deployments. |
B2 |
High-capacity Media |
Bridge → 10/25 GbE NIC or 1 GbE NIC |
Supports additional media sessions. |
Use for high-sessions deployments. |
