Configuring the System Setting

Last Updated : Aug 10, 2020 |

About this task

Note that the default setting for SIP lines is to match the system setting set below. Therefore, if different operation of SIP trunks or a SIP trunk is required, the trunk must be configured separately.

Procedure

  1. Using IP Office Manager, retrieve the configuration from the IP Office system.
  2. Select Configuration.
  3. Select the system from the navigation tree and click on System.
  4. Select Telephony and then select the Telephony sub-tab.
  5. Change the Media Connection Preservation setting as required.

    • Disabled: If selected, call preservation is not attempted for any calls.

    • Enabled: If selected, call preservation is attempted for supported telephones and for IP Office lines.

  6. Click OK.
  7. Save the configuration.
Related information
Configuring Media Preservation