Enter change ip-codec-set n or change ip-media-parameters n, where n is the IP codec set number.
ADDITIONAL INFORMATION:
The system displays the IP MEDIA PARAMETERS screen.
Note:
The codec set that has to be configured in the IP Network Region must be linked to this IP MEDIA PARAMETERS screen.
Fill in the following fields:
ADDITIONAL INFORMATION:
Audio Codec: G.711 a-law and u-law (for 10, 20, 30 ms packets), G.729/G.729a/G.729b/G.729ab (for 10, 20, 30, 40, 50, 60 ms packets), and G.723 (for 30, 60 ms packets) depending on the audio codec used for this codec set.
Note:
When using G.729 codecs, for outgoing packets, the legacy IP DECT system (ADMM) either uses
.
Silence Suppression: y or n depending on the codec you have set.
The ADMM system does not support silence suppression for
codecs.
Frame Per Pkt: 2.
Media Encryption: none, srtp-aescm-128, or srtp-aescm-256.
Select Enter to save your changes.
ADDITIONAL INFORMATION:
For information on administering the IP codec sets, see the Administering IP Codec sets section of Administering Network Connectivity on Avaya Aura®Communication Manager.
ADDITIONAL INFORMATION:
For information on additional parameters to control media stream usage for fax and data transport modes, see Avaya Aura® Communication Manager Screen Reference.
