Allowing Extn/User Auto-creation

Last Updated : Jul 14, 2017 |
The IP Office system can be set to automatically create extension and user entries in its own configuration as each B179 device registers with the system. It can speed up installation to enable this setting when installing several devices and then disable the setting once the installation has been completed.
Note:

  • Changing the SIP registrar settings of an IP Office system requires the IP Office system to be rebooted.

  • Auto-create settings should not be left enabled. If left enabled, the auto-create settings are automatically disabled 24–hours after being enabled.

  • Auto-create settings are not supported on Server Edition systems.

Procedure

  1. Using IP Office Manager, retrieve the IP Office system configuration.
  2. Select System.
  3. Select either the LAN1 or LAN2 tab as required.
  4. Select the VoIP sub-tab.
  5. Change the Auto-create Extn/User settings to the state required.
  6. Send the configuration back to the IP Office.