Use this procedure to configure file transfer into Avaya Oceana®.
Procedure
Log in to the Cluster Control Manager (CCM) console as the customer user.
To switch to the root user, type su - and press Enter.
Run the following command:
ccm release async configureVendors.sh -f
On the Oceana Storage host prompt, type the FQDN of Avaya Oceana® Cluster 3 where CustomerControllerService is installed.
On the Breeze User prompt, type the user name of the default user that authenticates file transfer uploads into Avaya Oceana®.
On the Breeze Password prompt, type the password of the default user that authenticates file transfer uploads into Avaya Oceana®.
On the Breeze Authentication URI prompt, type the URI for authenticating the default user that authenticates file transfer uploads into Avaya Oceana®.
Note:
If you use the file transfer feature to upload a file to Avaya Oceana®, you must install an ORCA stack on your cluster or an external cluster, so that you can leverage their orca-breeze-authentication service.
If you point to an external cluster for your ORCA service, you must run the following command to trust the external cluster for the file transfer service:
