Installing new snap-ins

Last Updated : Feb 21, 2025 |
Prolog information
Metadata
Keywords:
Complete this procedure to install new snap-ins on the upgraded cluster and to optionally install new versions of updated snap-ins. Be sure to install the newest versions of connector snap-ins and the snap-ins that are mandatory for your cluster profile. Mandatory services for a cluster profile listed on the Cluster Editor page. For a list of connector snap-ins, see Avaya Breeze® platform Overview and Specification.
  1. In System Manager, click ElementsAvaya Breeze®Service Management.
  2. Load the snap-in.
    1. Click Load.
    2. In the Load Service window, click Choose file, browse to select your snap-in and click Open.
    3. Click Load in the Load Service window.
    4. For licensed snap-ins, if you agree to the Avaya End User License Agreement (EULA), click Accept.
      STEP RESULT:
      Your snap-in displays on the Service Management page with a State of Loaded.
  3. Install the snap-in.
    1. Select the snap-in you want to install.
    2. Click Install.
    3. Select the clusters where you want the snap-in to reside and click Commit.
    4. To see the status of the snap-in installation, click the Refresh Table icon located in the upper-left corner of the All Services list.
      ADDITIONAL INFORMATION:
      Installed with a green check mark indicates that the snap-in has completed installation on all servers in the cluster. Installing with a yellow exclamation mark enclosed in a triangle indicates that the snap-in has not completed installation on all servers.