The following Avaya Vantage™ devices include an integrated camera:
K175
K155
The Avaya Vantage™K165 device does not include an integrated camera, but you can use an external USB camera. Regardless of whether you connect an external camera, you can still receive video from other devices.
Camera specifications for Avaya Vantage™ devices with an integrated camera
2.1 megapixels with 1920 x 1080 pixels sensor.
Fixed focus of 50 cm.
Focus range of 28 cm to infinity.
Field of view of 77.5 degrees.
Anti-flicker filter of 50 or 60 Hz.
Auto exposure.
Auto white balance.
Camera activity LED indicator.
Avaya Vantage™ notifies users that the integrated camera is active by using the green LED indicator.
The built-in LED indicator only works for the integrated camera, but not when you use an external camera.
Mechanical privacy shutter for the K175 device.
External, third-party cameras
You can use an external USB camera with Avaya Vantage™. If you connect a USB camera to a K155 or K175 device, then the external camera is prioritized over the integrated camera. You cannot choose or switch between cameras.
For a list of supported cameras and other third-party components, see Avaya Vantage™ Release Notes. You can find this document with the Avaya Vantage™ firmware by navigating to Downloads on the Avaya Support website.
Note:
When Avaya Vantage™ is connected to an AC adapter or an 802.3at PoE (Class 4) switch, the maximum power allocated to the USB port is 500mA. When connected to an 802.3af PoE (Class 3) switch, the maximum power allocated to the USB port is 100mA. If the USB camera requires more power than 100mA and an 802.3at PoE switch is not available, connect the device to an external AC adapter.
