|
set port edge admin state
|
Assign or de-assign RSTP edge-port admin state to a port for Rapid Spanning Tree Protocol (RSTP) treatment
|
|
set port point-to-point admin status
|
Specify a port’s connection type
|
|
set port spantree
|
Enable or disable spanning tree for specific ports
|
|
set port spantree cost
|
Set the spanning tree cost of a port
|
|
set port spantree force-protocol-migration
|
Force the port to send a rapid spanning tree hello packet (Bridge Protocol Data Unit)
|
|
set port spantree priority
|
Set the spanning tree priority level of a port
|
|
set spantree default-path-cost
|
Set the version of the spanning tree default path cost used by the current bridge
|
|
set spantree enable|disable
|
Enable or disable the spanning-tree algorithm for Branch Gateway
|
|
set spantree forward-delay
|
Specify the time used when transferring the state of a port to the forwarding state
|
|
set spantree hello-time
|
Specify the time interval between the generation of configuration BPDUs by the root
|
|
set spantree max-age
|
Specify the time to keep an information message before it is discarded
|
|
set spantree priority
|
Set the bridge priority for the spanning tree
|
|
set spantree tx-hold-count
|
Set the value in packets used by the spanning tree in order to limit the maximum number of BPDUs transmitted during a hello-time period
|
|
set spantree version
|
Set the version of the spanning tree protocol used by the device
|
|
show port edge state
|
Display the edge state of a specified port
|
|
show port point-to-point status
|
Display the point-to-point status of a specific port or all ports
|
|
show spantree
|
Display spanning-tree information
|
