Summary of QoS list commands

Last Updated : Apr 02, 2020 |
Prolog information
Metadata
Keywords:
For more information about these commands, see the Avaya Branch Gateway G450 CLI Reference.
Root level command
Command
Command
Description
interface {dialer| loopback| fastethernet|tunnel| vlan}
Enter the Dialer, Loopback, FastEthernet, Tunnel, or VLAN interface configuration context
ip qos-group
Activate a specific QoS list, for a specific direction, on the current interface
ip simulate
Test the action of a policy on a simulated packet
show ip qos-list
Display the attributes of a specific QoS list or all QoS lists for the current interface
ip policy-list-copy
Copy an existing policy list to a new list
ip qos-list
Enter configuration mode for the specified QoS list, and create the list if it does not exist
composite-operation
Enter the configuration mode for one of the current list’s composite operations
cos
Set the CoS priority value for the current composite operation
dscp
Set the DSCP value for the current composite operation
name
Assign a name to the current composite operation
show composite- operation
Display the attributes of the current composite operation
cookie
Set the cookie for the current list
dscp-table
Enter the DSCP table entry context for a particular DSCP value for the current QoS list
composite- operation
Specify the composite operation to execute for packets with the specified DSCP value
name
Assign a name to the current DSCP table entry
show dscp-table
Display the parameters of the current DSCP table entry
ip-rule
Enter configuration mode for a specified policy rule or, if the rule does not exist, create it and enter its configuration mode
composite- operation
Assign the specified composite operation to the current rule
destination-ip
Apply the current rule to packets with the specified destination IP address
dscp
Apply the current rule to packets with the specified DSCP value
fragment
Apply the current rule for non-initial fragments only
icmp
Apply the current rule to a specific type of ICMP packet
ip-protocol
Apply the current rule to packets with the specified IP protocol
show composite- operation
Display the parameters of the composite operation assigned to the current rule
show dscp-table
Display the current list’s DSCP table
show ip-rule
Display the attributes of the current rule
source-ip
Apply the current rule to packets from the specified source IP address
tcp destination-port
Apply the current rule to TCP packets with the specified destination port
tcp source-port
Apply the current rule to TCP packets from ports with specified source port
udp destination-port
Apply the rule to UDP packets with the specified destination port
udp source-port
Apply the rule to UDP packets from the specified source port
name
Assign a name to the current list
owner
Specify the owner of the current list
pre-classification
Specify which priority tag the current QoS list uses for data flows
show composite-operation
Display all composite operations configured for the list
show dscp-table
Display the current list’s DSCP table
show ip-rule
Display the rules configured for the current list attributes of a specific rule
show list
Display the attributes of the current list, including its rules
show ip qos-list
Display the attributes of a specific QoS list or all QoS lists