You can configure additional composite operations for QoS lists. You can also edit composite operations that you configured. You cannot edit pre-configured composite operations.
Note:
You cannot configure additional composite operations for access control lists, since all possible composite operations are pre-configured.
Enter the context of a QoS list.
Enter composite-operation followed by an index number.
ADDITIONAL INFORMATION:
The number must be 12 or higher, since numbers 1 through 11 are assigned to pre-configured lists.
Use one or more of the following commands to set the parameters of the composite operation:
dscp - to ignore the DSCP field, use the argument no change, or enter no dscp.
cos - to ignore the CoS field, use the argument no change, or enter no cos.
Enter name, followed by a text string, to assign a name to the composite operation.
ADDITIONAL INFORMATION:
You must assign a name to the composite operation, because when you attach the composite operation to a rule, you use the name, not the index number, to identify the composite operation.
