Use the ip crypto-group command, followed by the index of the crypto-group, to assign a crypto-group to the interface.
ADDITIONAL INFORMATION:
Important:
ip crypto-group is a mandatory command.
Optionally, you can set the following parameters:
The crypto ipsec minimal-pmtu command is intended for advanced users only. It sets the minimal PMTU value which can be applied to an SA when the Branch Gateway participates in Path MTU Discovery (PMTUD) for the tunnel pertaining to that SA.
The crypto ipsec df-bit command is intended for advanced users only. It sets the Do Not Fragment (DF) bit to either clear or copy mode: