Set the capture buffer to cyclic mode

Change the size of the capture file

Activate a capture list

Specify a capture interface (by default, the service captures from all interfaces simultaneously)

Set whether to capture IPSec VPN packets, handled by the internal VPN process, decrypted (plaintext) or encrypted (cyphertext)

Set the maximum octets that are captured from each frame

Start capturing packets

Stop capturing packets

Enable or disable the capture service

Clear the capture buffer (useful in case it holds sensitive information)

Upload the packet sniffing buffer to a file on a remote FTP server

Upload the packet sniffing buffer to a file on a remote SCP server

Upload the packet sniffing buffer to a file on a remote TFTP server

Upload the capture file to a USB mass storage device

Upload the packet sniffing buffer to a file on a remote HTTP server

Upload the packet sniffing buffer to a file on a remote SCP server via Avaya SBC tunnel

Enter the capture list configuration context, create a capture list, or delete a capture list

Set a number to identify a list (used by the rule-manager application)

Enter an ip-rule context or erase an ip-rule

Create or edit a composite operation

Define an equation on the destination IP

Specify the DSCP value to be set by the current IP rule

Apply the current rule to non-initial fragments only

Set 'ip-protocol' to ICMP and an equation on the types of ICMP messages

Set the IP protocol

Set the current rule to apply to packets from the specified source IP address

Set 'ip-protocol' to TCP and an equation on the destination port

Set 'ip-protocol' to TCP and an equation on the source port

Set 'ip-protocol' to UDP and an equation on the destination port

Set 'ip-protocol' to UDP and an equation on the source port

Name a capture list

Set the name of the person or application that has created the list

Show the sniffer status

Show a hex-dump of the captured frames

Show capture list(s)

View capture file upload status