Configuring capture lists

Last Updated : Nov 18, 2020 |
Prolog information
Metadata
Keywords:
  1. Use the ip capture-list command, followed by the list number, to enter the context of a capture list (and to create the capture list if it does not exist).
    ADDITIONAL INFORMATION:
    Capture lists are numbered from 501 to 599.
    For example:
    Gxxx-001(super)# ip capture-list 510
    Gxxx-001(super-Capture 510)#
You can use the following commands to set the parameters of the capture list:
  • Use the name command to assign a name to the capture list.
  • Use the owner command to record the name of the person that created the list.
  • Use the ip-rule command to define rule criteria for the capture list.
Note:
You can use the cookie command to set the list cookie for the capture list. However, capture list cookies are not currently used by any application.
Related links
Packet sniffing
Rule criteria for a capture listConfiguring rule criteria for a capture listViewing the capture listApplying a capture listConfiguring packet sniffing settingsStarting the packet sniffing service