View details of 1600 series phones

Last Updated : Jul 06, 2021 |

Procedure

  1. While the phone is on-hook and idle, press MUTE CRAFT VIEW # or MUTE 27238 8439 #.
  2. To display the details, press * at any time during viewing. The following settings are displayed:

    Value

    Description

    Model

    Shows the phones model number; for example, 4624D02A.

    Market

    Shows 1 for export or 0 for domestic (US). Not displayed on all phone types.

    Phone SN

    Shows the phone's serial number.

    PWB SN

    Shows the phone's Printed Wiring Board Serial Number.

    PWB comcode

    Shows the PWB's comcode.

    MAC address

    Shows the phone's MAC address as paired hexadecimal numbers.

    L2 tagging

    Indicates whether L2 tagging is on, off or set to auto.

    VLAN ID

    Used for the phone. The default is 0.

    IP address

    The IP address assigned to the phone.

    Subnet mask

    The subnet mask assigned to the phone.

    Router

    The router address assigned to the phone.

    File server

    The address of the file server assigned to the phone.

    Call Server

    The address of the phone's H.323 Gatekeeper.

    802.1X

    The current setting for 802.1X operation if being used.

    Group

    This displays the group value set on the phone. Group values can be used to control which options (both firmware and settings) a phone downloads.

    Protocol

    Display Default.

    filename1

    Shows the name of the phone application file in the phone's memory. These are values from within the boot file loaded and not the actual file name.

    10MBps Ethernet

    100Mbps Ethernet

    Shows the speed of the detected LAN connection.

    filename2

    Shows the boot file name and level. These are values from within the boot file loaded and not the actual file name.
  3. To end the procedure and restore the user interface to its previous state, press #.
  4. To display the next value press *.