The following is an example of the commands you can used to set the screensaver image operation on J100 Series phones.

SET SCREENSAVERON 10
SET SCREENSAVER_CLOCK_ENABLE 1
SET SCREENSAVER_SLIDESHOW_INTERVAL 60
## MAIN SCREEN
SET SCREENSAVER_IMAGE "J159scrsaver01.jpg,J159scrsaver02.jpg,J159scrsaver03.jpg"
SET SCREENSAVER_IMAGE_DISPLAY J159scrsaver01.jpg
SET SCREENSAVER_IMAGE_SELECTABLE 0
SET 
## SECONDARY SCREEN
SET SCREENSAVER_IMAGE "J159secondsaver.jpg"
SET SCREENSAVER_IMAGE_DISPLAY J159secondsaver.jpg
SET SCREENSAVER_IMAGE_SELECTABLE 0

Main screen

The individual commands are:

• SET SCREENSAVERON <minutes>

  Set the number of minutes of idle time after which the phone displays screensaver images.

  • You can set a value between 0 to 480 minutes.

    • If no value is set, the default is 240 minutes.

    • If set to 0, the phone displays the screensaver only when the phone user uses the Applications > Activate Screensaver option.

• SET SCREENSAVER_CLOCK_ENABLE <N>

  Specify whether the phone displays the current time on top of the screensaver image. The user can change this on the phone's Settings > Display > Screensaver menu. Where <N> is:

  • 0 = Do not display the clock.

  • 1 = Display the clock.

• SET SCREENSAVER_IMAGE "<filename1>,<filename2>,..."

  This commands specifies a list of screensaver images the phone requests from the file server. This is a comma-separated list of file names enclosed in " " quotation marks.

• SET SCREENSAVER_IMAGE_DISPLAY <filename|N>

  Set which image the phone uses, as a screensaver, where either:

  • <filename> is the name of one of the images requested using SET SCREENSAVER_IMAGE.

  • <N> selects one of the phones 7 default images using values 0 to 6.

  • You can specific a comma-separated of images to use with SET SCREENSAVER_SLIDESHOW_INTERVAL.

• SET SCREENSAVER_IMAGE_SELECTABLE <N>

  Set whether the phone user can change the screensaver image using the Settings > Display > Screensaver menu. Where <N> is:

  • 0 = The user cannot select the screensaver image. They do not see the selection menu.

  • 1 = The user can select the saver image from the phone menu.

• SET SCREENSAVER_SLIDESHOW_INTERVAL <T>

  If set and enabled, phones with multiple screensaver images will switch between images in slideshow mode. <T> is the time in seconds between 0 (no slideshow) and 999.

  • This settings applies to all screens (main, secondary and JEM24) with multiple screensaver files specified.

  • User selection of a screensaver image overrides slideshow mode.

  • This feature requires the J100 phones to use J100 R4.1.5.0 or higher firmware.

Secondary screen

A similar set of commands suffixed with _SECONDARY, as shown in the example above, exist for phones which have a secondary screen.