Enabling Wi-Fi

Last Updated : Jan 19, 2024 |

About this task

You can use the following process to manually enable Wi-Fi connection on a J100 phone with the wireless module installed.

Access the administration menu:
1. If shown on the display, press Admin. Otherwise, press More and Admin or press and select Administration.
2. Enter the administration password and press Enter. These phones do not support pressing # to enter the password.
If you want the phone to use Wi-Fi: Wireless connection is supported on phones with the optional Wi-Fi module installed. Select Network interfaces.
1. Change the Network mode from Ethernet to Wi-Fi.
2. Press Save. The phone scans for available wireless networks.
3. Select the required network and click Connect. Press OK.
  - If hidden Wi-Fi is enabled (see Enabling hidden Wi-Fi SSID support), you can click scroll down and select Add Network to add details for connecting to a network that does not broadcast its SSID.
4. In the Password field, enter the password for the wireless network and press Wi-Fi. If the phone is able to connect to the network, it is restarted.

Send Feedback