Upgrade Management field descriptions

Last Updated : Jun 07, 2024 |
Prolog information
Metadata
Keywords:
Name
Description
Install on Same Host
The option to select the same or a different server. The options are:
  • Select: To upgrade on the same server.
  • Clear: To upgrade to a different server.
If you do not select the check box, you must add a new server or select a server from the list to which you want to update.
Note:
When upgrading from System Platform-based System Manager to AVP or ESXi, the system displays this field.
Platform FQDN
The platform FQDN to which you want to upgrade.
The system displays the CPU and memory details of the platform in the Capacity Details section.
Application Name
The application name displayed on the Add Element page.

OVA/ISO Details

Name
Description
Select the OVA
The option to select a .ova file of the virtual machine that is available on System Manager.
OVA file
The absolute path to the .ova file of the virtual machine.
The field is available only when you click Select the OVA from Local SMGR.
Submit File
Selects the .ova file of the virtual machine that you want to deploy.
The field is available only when you click Select the OVA from Local SMGR. The system displays the network configuration details in the Network Parameters section based on the System Manager virtual machine.
Browse from Datastore
The option to provide the pre-staged folder.
This option is enabled when you upgrade the application on the Appliance Virtualization Platform, VMware ESXi, and vCenter platforms.
For upgrade, this option is applicable only for System Manager.
Select Pre-stage Directory
Displays the Datastore Explorer dialog box to select the pre-stage folder from the data store.
The field is available when you select Browse Pre-stage Location
View Prestage Details
Displays the details of the pre-stage folder.
Validate checksum of OVA files
Validates the checksum of the OVA file.
Flexi Footprint
The footprint size supported for the selected server.
The system validates for the CPU, memory, and other parameters in the Capacity Details section. You must ensure that the status is .
SMGR Data migration Utility file
The absolute path to the System Manager data migration utility file.
Note:
Provide the latest data migration bin that is available for the System Manager release.
Service Pack or Feature Pack
The absolute path to the service pack or feature pack.
For the latest service pack or feature pack, see Avaya Aura® Release Notes on the Avaya Support website at http://support.avaya.com/.

Configuration Parameters

The system populates the values for most of the fields from the 7.x or 8.0.x system. You must provide information, such as password, FQDN, time zone, and EASG.

Management Network Settings

Name
Description
Management IPv4 Address (or Out of Band Management IPv4 Address)
The IPv4 address of the System Manager application for Out of Band Management.
This field is an optional network interface to isolate management traffic on a separate interface from the inbound signaling network.
Management Netmask
The Out of Band Management subnetwork mask to assign to the System Manager application.
Management Gateway
The gateway IPv4 address to assign to the System Manager application.
IP Address of DNS Server
The DNS IP addresses to assign to the primary, secondary, and other System Manager applications. Separate the IP addresses with commas (,).
Management FQDN
The FQDN to assign to the System Manager application.
Note:
System Manager hostname is case sensitive. The restriction applies only during the upgrade of System Manager.
IPv6 Address
The IPv6 address of the System Manager application for out of band management. This field is optional.
IPv6 Network prefix
The IPv6 subnetwork mask to assign to the System Manager application. This field is optional.
IPv6 Gateway
The gateway IPv6 address to assign to the System Manager application. This field is optional.
Default Search List
The search list of domain names. This field is optional.

Public Network Settings

Name
Description
Public IP Address
The IPv4 address to enable public access to different interfaces. The field is optional.
Public Netmask
The IPv4 subnetwork mask to assign to System Manager application. The field is optional.
Public Gateway
The gateway IPv4 address to assign to the System Manager application. The field is optional.
Public FQDN
The FQDN to assign to the System Manager application. The field is optional.
Public IPv6 Address
The IPv6 address to enable public access to different interfaces. The field is optional.
Public IPv6 Network Prefix
The IPv6 subnetwork mask to assign to System Manager application. The field is optional.
Public IPv6 Gateway
The gateway IPv6 address to assign to the System Manager application. The field is optional.

Virtual FQDN

Name
Description
Virtual Hostname
The virtual hostname of the System Manager application.
Note:
  • The VFQDN value must be unique and different from the FQDN value of System Manager and the elements.
  • VFQDN is a mandatory field.
  • By default, VFQDN entry gets added in the /etc/hosts file during installation. Do not remove VFQDN entry from the /etc/hosts file.
  • VFQDN entry will be below FQDN entry and mapped with IP address of system. Do not manually change the order and value.
  • You must keep VFQDN domain value same as of FQDN domain value.
  • If required, VFQDN value can be added in DNS configuration, ensure that the value can be resolved.
  • Secondary Server (Standby mode) IP address value is mapped with VFQDN value in hosts file of Primary server IP address. After Secondary Server is activated, then the IP address gets updated with Secondary Server IP address.
  • In Geographic Redundancy, the primary and secondary System Manager must use the same VFQDN.
  • After System Manager installation, if you require to change the System Manager VFQDN value, perform the following:
    1. Log in to System Manager with administrator privilege credentials.
    2. Run the changeVFQDN command.
Important:
When you run the changeVFQDN command on System Manager, data replication synchronization between System Manager with Session Manager and other elements fails To correct VFQDN on other elements and to retrieve new VFQDN from System Manager, see product-specific Administering document.
Virtual Domain
The virtual domain name of the System Manager application.
Name
Description
SNMPv3 User Name Prefix
The prefix for SNMPv3 user.
SNMPv3 User Authentication Protocol Password
The password for SNMPv3 user authentication.
Confirm Password
The password that you retype to confirm the SNMPv3 user authentication protocol.
SNMPv3 User Privacy Protocol Password
The password for SNMPv3 user privacy.
Confirm Password
The password that you must provide to confirm the SNMPv3 user privacy protocol.

SMGR CLI USER

Name
Description
SMGR command line user name
The user name of the System Manager CLI user.
Note:
Do not provide the common user names, such as admin, csaadmin, postgres, root, bin, daemon, adm, sync, dbus, vcsa, ntp, saslauth, sshd, tcpdump, xfs, rpc, rpcuser, nfsnobody, craft, inads, init, rasaccess, sroot, postgres, smgr, and nortel.
SMGR command line user password
The password for the System Manager CLI user.
Confirm Password
The password that you retype to confirm the System Manager CLI user authentication.

Backup Definition

Name
Description
Schedule Backup?
  • Yes: To schedule the backup jobs during the System Manager installation.
  • No: To schedule the backup jobs later.
    Note:
    If you select No, the system does not display the remaining fields.
Backup Server IP
The IP address of the remote backup server.
Note:
The IP address of the backup server must be different from the System Manager IP address.
Backup Server Login Id
The login ID of the backup server to log in through the command line interface.
Backup Server Login Password
The SSH login password to log in to the backup server from System Manager through the command line interface.
Confirm Password
The password that you reenter to log in to the backup server through the command line interface.
Backup Directory Location
The location on the remote backup server.
File Transfer Protocol
The protocol that you can use to create the backup. The values are SCP and SFTP.
Repeat Type
The type of the backup. The possible values are:
  • Hourly
  • Daily
  • Weekly
  • Monthly
Backup Frequency
The frequency of the backup taken for the selected backup type.
If there is no successful backup in the last ‘n’ days, where ‘n’ is configurable, then System Manager raises an alarm. The default number of days is set to 7, but it can be configured to any number from 1 to 30 using the 'Alarm Threshold for number of days since last successful SMGR Backup' parameter.
Backup Start Year
The year in which the backup must start. The value must be greater than or equal to the current year.
Backup Start Month
The month in which the backup must start. The value must be greater than or equal to the current month.
Backup Start Day
The day on which the backup must start. The value must be greater than or equal to the current day.
Backup Start Hour
The hour in which the backup must start.
The value must be six hours later than the current hour.
Backup Start Minutes
The minute when the backup must start. The value must be a valid minute.
Backup Start Seconds
The second when the backup must start. The value must be a valid second.

Enhanced Access Security Gateway (EASG) - EASG User Access

Name
Description
Enter 1 to Enable EASG (Recommended) or 2 to Disable EASG
Enables or disables Avaya Logins for Avaya Services to perform the required maintenance tasks.
The options are:
Avaya recommends that you enable EASG.
You can also enable EASG after deploying or upgrading the application using the command: EASGManage --enableEASG.

Network Parameters

Name
Description
Out of Band Management IP Address
The IP Address that you must assign to the Out of Band Management port group. The field is mandatory.
Public
The port number that you must assign to public port group. The field is optional.
Button
Description
Upgrade
Displays the EULA acceptance screen. To accept EULA and start the upgrade process, click Accept.