Configure alarming and remote access for a Session Manager instance.
Do not perform this procedure if you are upgrading the Session Manager server that is already configured on a SAL Gateway.
Before you begin
Procedure
Log in to the System Platform Web console.
Click Server Management > SAL Gateway Management.
On the SAL Gateway Management page, click Launch SAL Gateway Management Portal.
When the SAL Gateway login page appears, enter the same user ID and password that you used to log in to the System Platform Web Console.
In the navigation pane of the SAL Gateway user interface, select Secure Access Link Gateway > Managed Element.
On the Managed Element page, click Add new.
Enter information in the following fields:
Host Name: Host Name of the Session Manager server.
IP Address: IP Address of the Session Manager server.
From the Model list, select SessionMgr_x.x.x.x.
The Product field is filled in automatically after you select the Session Manager.
Solution element ID: The Solution Element ID (SE ID) of Session Manager. The format of the ID is (NNN)NNN-NNNN where N is any digit from 0 to 9.
Product ID: The Product ID of Session Manager.
Select the Provide remote access to this device check box.
Select the Transport alarms from this device check box.
Important:
The SAL Gateway forwards alarms for this Session Manager only after you select the Provide remote access to this device and Transport alarms from this device check boxes.
Click Add.
Click Apply to apply the changes.
Restart the SAL Gateway for the configuration changes to take effect:
In the navigation pane of the SAL Gateway user interface, select Administration > Apply Configuration Changes.
Click Apply next to Configuration Changes.
The system restarts the SAL Gateway and updates the SAL Gateway with the new configuration values.
