Verify that at least one entity link has been defined for each FQDN and Transport entry.
In System Manager, click Elements Session ManagerNetwork ConfigurationLocal Host Name Resolution.
Click New.
Enter the host information on the New Local Host Name Entries page.
ADDITIONAL INFORMATION:
You can enter a maximum of ten host names.
For the Host Name (FQDN), enter the FQDN or IP address of the host. The host name entries override the information provided by DNS.
Enter the IP address that the host name is mapped to. A host can be mapped to more than one IP addresses and each of these mappings are a separate entry.
Enter the port number that the host should use for routing using the particular IP address.
Enter a value in Priority. If there are multiple IP address entries for a given host, Session Manager tries the administered IP addresses in the order of the priority.
Enter a value in Weight. If there are multiple IP address entries for a given host, and if some entries have the same priority, then for each priority level, Session Manager chooses a host according to the specified weights.
ADDITIONAL INFORMATION:
For systems with the cluster database enabled, see the local load balancing recommendations. For systems with geographical redundancy, see the geo-redundancy example configuration for Priority and Weight suggestions.
