The following example creates a port redundancy pair:

G450-001(super)# set port redundancy 10/5 10/6 on 1
Monitor: Port 10/6 is redundant to port 10/5.
Port redundancy is active - entry is effective immediately

The following example deletes a port redundancy pair:

G450-001 (super)# set port redundancy 10/5 10/6 off
Entry Monitor removed: Port 10/6 is not redundant to port 10/5

The following example enables all configured port redundancies:

Gxxx-001(super)# set port redundancy enable
All redundancy schemes are now enabled

The following example disables all configured port redundancies:

Gxxx-001(super)# set port redundancy disable
All redundancy schemes are disabled but not removed

The following example configures the switchback interval for all configured port redundancies:

Gxxx-001(super)# set port redundancy-intervals 60 30
Done!

The following example displays port redundancy information:

G450-001 (super)# show port redundancy
Redundancy Name     Primary Port        Secondary Port      Status
-----------------   --------------      ----------------    --------
Monitor             10/5                10/6                primary
Minimum Time between Switchovers: 60
Switchback interval: 30