snmp-server host command parameters

Last Updated : Mar 26, 2020 |

You can define the following parameters with this command:

  • The IP address of the recipient.

  • Whether to send traps or informs to the recipient.

  • The SNMP security model (v1, v2c, v3). For SNMPv1 and SNMPv2c, you must also specify the community name. For SNMPv3, you must specify the level of authentication and a username to use in notifications. Authentication levels are:

    • auth. Authentication without encryption

    • noauth. No authentication

    • priv. authentication with encryption

  • The UDP port of the target host to use as the destination UDP port when sending a notification to this manager. Optional. The default is 162.

Notification filter groups, to modify the types of traps that are sent to the recipient. Optional. If not specified, all notification groups are sent.