Summary of SLS configuration commands

Last Updated : Jul 17, 2020 |

For more information about these commands, see Avaya Branch Gateway G450 CLI Reference.

Root Level Commands

First Level Context Commands

Second Level Context Commands

Description

set sls

-

-

Enable or disable SLS

show sls

-

-

Display SLS status: enabled or disabled

sls

-

-

Enter the sls context

-

bri

-

Administer an ISDN Basic Rate Interface (BRI) port for SLS

-

-

set bearer-capability

Set the Information Transfer Rate field of the Bearer Capability IE in SLS

-

-

set country-protocol

Specify the ISDN Layer 3 country protocol type in SLS

-

-

set directory-number-a

Assign a directory number to the B1 channel of the BRI interface in SLS

-

-

set directory-number-b

Assign a directory number to the B2 channel of the BRI interface in SLS

-

-

set endpoint-init

Determine whether or not the far-end supports endpoint initialization in SLS

-

-

set interface

Specify the glare-handling convention for a BRI link in SLS

-

-

set interface-companding

Set the interface to agree with the companding method used by the far-end of the DS1 circuit for SLS mode

-

-

set layer1-stable

Determine whether or not to keep the physical layer active (stable) between calls in SLS

-

-

set name

Identify the user name for an ISDN facility in SLS

-

-

set side

Specify the glare-handling conditions when the set interface command is administered as peerMaster or peerSlave for the ISDN link in SLS

-

-

set spid-a

Assign a Service Profile Identifier (SPID) to the B1 channel of the BRI link in SLS

-

-

set spid-b

Assign a Service Profile Identifier (SPID) to the B2 channel of the BRI link in SLS

-

-

set tei-assignment

Select the method by which the Layer 2 (LAPD) protocol obtains its Terminal Endpoint Identification (TEI) address in SLS

-

-

show

List all BRI SLS parameters for this BRI port

-

clear attendant

-

Delete the administered attendant provisioning in SLS

-

clear bri

-

Delete the administration for a given BRI channel in SLS

-

clear dial-pattern

-

Delete a single dialed string pattern entry in the SLS data set

-

clear ds1

-

Delete the administration for a specific DS1 channel in SLS

-

clear fac

-

Delete an administered Feature Access Code for SLS

-

clear incoming-routing

-

Delete an entry for a particular incoming routed string that is associated with a given trunk group in SLS

-

clear sig-group

-

Delete the administration for a given ISDN signaling group in SLS

-

clear slot-config

-

Delete the slot and the board administration in the Branch Gateway for SLS

-

clear survivable-config

-

Set the SLS parameters to their default values

-

clear station

-

Delete a particular extension number in the SLS data set

-

clear trunk-group

-

Delete a trunk group entry from the SLS data set

-

dial-pattern

-

Administer ARS dial patterns for SLS

-

-

set delete-digits

Specify the number of digits to be deleted from the beginning of the dialed string for an outbound call in SLS

-

-

set deny

Permit or deny access to an outbound trunk in SLS

-

-

set insert-digits

Specify the number of digits to be inserted at the beginning of the dialed string for an outbound call in SLS

-

-

set max-length

Establish the maximum length of the dialed string in SLS

-

-

set min-length

Establish the minimum length of the dialed string in SLS

-

-

set tgnum

Designate the trunk-group number in SLS

-

-

set type

Administer the type of outbound call in SLS

-

-

show

List all dial-pattern SLS parameters

-

ds1

-

Administer DS1 trunks for SLS

-

-

set bearer-capability

Set the Information Transfer Rate field of the Bearer Capability IE in SLS

-

-

set bit-rate

Set the maximum transmission rate for the DS1 facility in SLS

-

-

set channel-numbering

Select the channel-numbering method for B-channels on an E1 interface in SLS

-

-

set connect

Specify the equipment at the far-end of the DS1 link in SLS

-

-

set country-protocol

Specify the ISDN Layer 3 country protocol type in SLS

-

-

set interface

Specify the glare-handling convention for a DS1 link in SLS

-

-

set interface-companding

Set the interface to agree with the companding method used by the far-end of the DS1 circuit for SLS mode

-

-

set long-timer

Increase the duration of the T303 (call establishment) timer in SLS

-

-

set name

Identify the user name for a DS1 facility in SLS

-

-

set protocol-version

Specify country protocol for countries whose public networks allow for multiple ISDN Layer 3 country protocols for ISDN Primary Rate service in SLS

-

-

set side

Specify the glare-handling conditions when the set interface command has been administered as peerMaster or peerSlave for the ISDN link in SLS

-

-

set signaling-mode

Set the signaling mode for the DS1 facility in SLS

-

-

show

List all SLS parameters for this DS1 interface

-

incoming-routing

-

Administer digit-treatment for incoming routed calls in SLS

-

-

set delete-digits

Specify number of digits to be deleted from the beginning of the dialed string for an inbound trunk call in SLS

-

-

set insert-digits

Specify number of digits to be inserted at the beginning of the dialed string for an inbound trunk call in SLS

-

-

set length

Specify the length of the dialed string in SLS

-

-

set match-pattern

Specify the beginning digit pattern of the incoming alphanumeric dial string to be matched against in SLS

-

-

show

List all incoming-routing SLS parameters

-

set attendant

-

Specify the dial access code for the attendant feature, and specify the station which serves as the branch office attendant position

-

set date-format

-

Set a date format for the SLS data set

-

set fac

-

Administer the Feature Access Code for SLS

-

set ip-codec-set

-

Configure an IP codec set within the SLS data set

-

set max-ip-registrations

-

Configure the maximum number of IP registrations allowed in the SLS data set

-

set slot-config

-

Define the slot and the board type in the Branch Gateway for SLS

-

show attendant

-

Display the administered attendant provisioning

-

show bri

-

List the administered BRI parameters for SLS

-

show date-format

-

Display the current date format for the SLS data set

-

show dial-pattern

-

List all dial-pattern strings in the SLS data set

-

show ds1

-

List the administered DS1 parameters for SLS

-

show fac

-

List the administered Feature Access Codes for SLS

-

show incoming-routing

-

Show all of the administered dial patterns in SLS for trunk groups

-

show ip-codec-set

-

List the codec set entries for SLS

-

show max-ip-registrations

-

Display the maximum IP registration administration in the SLS data set

-

show sig-group

-

List all administered signaling groups in SLS

-

show slot-config

-

Define the slot and the board administration in the Branch Gateway for SLS

-

show station

-

Display extension-specific SLS data parameters

-

show trunk-group

-

Display trunk group administration in SLS

-

sig-group

-

Administer signaling groups for SLS

-

-

add nfas-interface

Identify a list of DS1 modules that are controlled by the primary D-channel in SLS

-

-

remove nfas-interface

Remove a member from a NFAS-managed DS1 group in SLS

-

-

set associated-signaling

Specify whether the D-channel is physically present in the DS1 interface in SLS

-

-

set primary-dchannel

Identify the D-channel number in SLS

-

-

set trunk-group-chan-select

Specify the trunk-group number that can accept incoming calls in cases where the Information Channel Selection field does not specify a preferred channel for bearer transport in SLS

-

-

show

List all SLS parameters for this signaling-group

-

station

-

Administer stations for SLS

-

-

set cor

Administer the class-of-restriction values for each station that uses SLS

-

-

set expansion-module

Administer a DCP or IP station for an expansion module in SLS

-

-

set name

Identify the user name for a station in SLS

-

-

set password

Administer a station password in SLS for DCP and IP station sets

-

-

set port

Administer the port on a station for SLS

-

-

set swhook-flash

Enable SLS to recognize the switchhook flash signal from a particular analog station and to provide a subsequent transfer service

-

-

set trunk-destination

Administer a station extension to be included in a pool of stations that can receive incoming analog loop-start trunk calls in circular queuing in SLS

-

-

set type

Administer specific phone models for SLS

-

-

show

List all Station SLS parameters for this station

-

trunk-group

-

Administer trunks for SLS

-

-

add port

Administer the port appropriate for SLS

-

-

clear tac

Remove a trunk access code (TAC) assignment from a trunk group in SLS

-

-

remove port

Remove the port assignment from a trunk group in SLS

-

-

set busy-disconnect

Specify whether the SLS analog trunk call state machine will monitor the trunk for the presence of a busy tone, and disconnect the call if a busy tone is detected

-

-

set cbc

Specify whether the ISDN trunk group will operate by declaring the service type explicitly on a call-by-call basis

-

-

set cbc-parameter

Specify the type of service or feature being declared in the Network Services Facility information element

-

-

set cbc-service-feature

Define what class of service is being specified, as part of the scocs service declared in the Network Services Facility information element

-

-

set channel-preference

Define how the Channel Identification IE field is encoded in SLS

-

-

set codeset-display

Specify which Q.931 codesets are allowed to send display information to the user phone in SLS

-

-

set codeset-national

Specify which Q.931 codesets are allowed to send National Information Elements to the user phone in SLS

-

-

set dial

Define the method for sending outbound digits in SLS

-

-

set digit-handling

Define how the inbound/outbound calls handle the transmission/reception of the dialed pattern in SLS

-

-

set digits

Define the inserted dial string that is added to the beginning of the received DID incoming dial string for analog DID trunks or for DS1 TIE trunks using in-band signaling in SLS

-

-

set digit-treatment

Define the incoming digit treatment for analog DID trunks or for DS1 TIE trunks using in-band signaling in SLS

-

-

set incoming-destination

Identify an extension to directly receive an incoming trunk call in SLS

-

-

set incoming-dialtone

Provide a dial tone in response to far-end trunk group seizures in SLS

-

-

set japan-disconnect

Perform a disconnect sequence (CONNECT message followed by a DISCONNECT message) in SLS

-

-

set name

Identify the user name for a trunk group in SLS

-

-

set numbering-format

Specify the numbering plan for this trunk in SLS

-

-

set send-name

Define whether or not the calling, connected, called, or busy party’s administered name is sent to the network on outgoing or incoming calls in SLS

-

-

set send-number

Define whether or not the calling, connected, called, or busy party’s administered number is sent to the network on outgoing or incoming calls in SLS

-

-

set supervision

Define the incoming signaling supervision mode for analog DID trunks or DS1 tie trunks only in SLS

-

-

set tac

Administer the trunk-access codes for SLS

-

-

set trunk-hunt

Specify the trunk-hunting search within a facility in an ISDN trunk group or through a non-ISDN digital trunk group in SLS

-

-

show

List all trunk-group SLS parameters for this trunk-group