Configuring the initial WAN

Last Updated : Apr 03, 2020 |

Procedure

  1. Add one of the following WAN media modules:

    • Avaya MM340 E1/T1 media module

    • Avaya MM342 USP media module

    Note:

    You can also use the Fast Ethernet port on the Branch Gateway chassis as the endpoint for a WAN line by configuring this interface for PPPoE.

  2. Connect the WAN line to the media module.

    For more information see

    For more information, see Installing and Upgrading the Avaya Branch Gateway G450.

  3. Configure the WAN interface on the WAN media modules MM340 and MM342.
  4. By default, a Branch Gateway WAN interface uses Point-to-Point Protocol (PPP).
  5. If you want frame relay encapsulation on the WAN, configure frame relay.
  6. Test the WAN configuration.

    See WAN configuration and testing connectivity section.

  7. Enter copy running-config startup-config to save the configuration.
Related information
Configuring PPPoE