Upgrading software and firmware using a USB mass storage device

Last Updated : Mar 27, 2020 |

About this task

You can upgrade software and firmware using a USB mass storage device.

Procedure

  1. Obtain an upgrade file from Avaya and place it on your PC.
  2. Insert the USB mass storage device into the PC’s USB port, and copy the software or firmware file(s) to the USB mass storage device.
  3. Remove the USB storage device from the PC, and insert it in Branch Gateway USB port.
  4. Copy the software or firmware files to Branch Gateway using one of the following commands:

    • copy usb SW_imageA

    • copy usb SW_imageB

    • copy usb module

    • copy usb phone-imageA (or imageB, or imageC, or imageD)

    • copy usb phone-scriptA (or phone-scriptB)

    • copy usb announcement-file

    • copy usb auth-file

    • copy usb startup-config

    • copy usb easg

    • EASGSiteCertManage copy usb

  5. Use the show download software status command to display the status of the firmware download process.