For more information about these commands, see the Avaya Branch Gateway G450 CLI Reference.
Root level command
Command
Description
interface console
-
Enter Console interface configuration context. Use the no form of this command to set the console parameters to their default values.
-
async mode interactive
Enter modem mode every time the proprietary modem cable is plugged into the Console port
-
async mode terminal
Disable interactive mode on the Console
-
async modem-init-string
Change the default modem initialization string
-
async reset-modem
Reset the connected modem
-
ip address
Assign an IP address and mask to an interface. This is the IP address to which a remote user can connect using Telnet.
-
ip peer address
Change the IP address offered to a requesting calling host during PPP/IPCP connection establishment. By default, the interface offers its own IP address plus one.
-
ppp authentication
Configure the authentication method used when starting a client session on the PPP server
-
ppp chap-secret
Configure the shared secret used in PPP sessions with CHAP authentication
-
ppp timeout authentication
Set the maximum time to wait for an authentication response
-
show ppp authentication
Display PPP authentication status
-
shutdown
Disconnect an active PPP session and shut down the modem
-
speed
Set the PPP baud rate to be used by asynchronous PPP ports.
-
timeout absolute
Set the number of minutes until the system automatically disconnects an idle PPP incoming session. By default, there is no timeout.
