Preparing a USB device on Windows using .img file

Last Updated : May 19, 2023 |
Prolog information
Metadata
Keywords:
Before you begin
Ensure the USB device has minimum storage capacity of 4 GB.
Download the .img file as described in Software to download.
  1. Download and set up a disk imaging utility like Win32 Disk Imager.
  2. Copy the Avaya SBC USB image file to the Windows system.
  3. Ensure that the checksum matches the checksum calculated by any checksum utility.
  4. Plug in the USB device on the Windows system.
    ADDITIONAL INFORMATION:
    If you get an error indicating that the system is in use, format the USB device before using the Win32 Disk Imager application.
  5. In the Win32 Disk Imager application, select the Avaya SBC image that you downloaded and the correct USB device and click Write.
    ADDITIONAL INFORMATION:
    Other:
    Do not change the label of the filesystem on the USB drive. The default label is SBC_USB.
  6. Wait for the image to be written to the USB device.