With the Send-NN feature, you can override the original caller ID of your phone with a caller ID configured for Send-NN calls.
The administrator must configure Send-NN on your phone.
The Send-NN feature can be configured in the following two modes:
Transient: You must press the Send-NN feature line key for every Send-NN call. When you press the key, the corresponding green LED is on for 2 seconds and then turns off.
Permanent: You must activate the feature from the Features screen. All the outgoing calls made while the feature is active are Send-NN calls. To deactivate this feature, press the feature line key.
The green LED is on when the Send-NN feature is active.
The phone displays the Send-NN feature line in the format NN <XXXXXXX> T, where NN is the feature code, XXXXXXX is the configured extension, and T or P indicates whether the feature is in transient mode or permanent mode, respectively.
You can make the Send-NN call using the feature screen, phone main, or secondary display.
The administrator can configure multiple Send-NN buttons on your phone. If multiple Send-NN permanent buttons are configured, only one is active at a time.
If the phone has transient and permanent Send-NN buttons active simultaneously, the transient mode precedes the permanent mode.
The Send-NN feature is active simultaneously on all the devices in a Multi-Device Access (MDA) setup.
