Enabling hub interface for 1600 series phones

Last Updated : Jul 06, 2021 |
Prolog information
Metadata
Keywords:
  1. While the phone is on-hook and idle, press MUTE <password> INT # or MUTE <password> 468 #.
    The phones port settings are shown in sequence. The options vary between different models of phone.
    • PHY2=
      This is the PC connection LAN socket marked as on the phone. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.
    • IR=
      This is the infrared (IR) port located on the front of some H.323 IP phones. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.
  2. Press # to save the new values.
Result
New values being saved is displayed and then the set returns to normal operation.
Related links
Enabling hub interface