Type list measurements ds1 summary MedMod [local | carrier-local | remote] [schedule], where Med is the media gateway number, and Mod is the module number.
ADDITIONAL INFORMATION:
You can use the following parameters with the command:
local: To display a report of the local measurements.
carrier-local: To display a report of the carrier measurements.
remote: To display a report of the remote Channel Service Unit (CSU) measurements.
schedule: To print the report at a scheduled time.
Press Enter.
STEP RESULT:
Note:
The system displays the Measurements command has timed out. See Traffic Reports manual error message when no response is received from the DS1 media module. You must escalate this issue to Tier III.
