Adding a routing rule to the tenant IP Office routing profile

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to add a routing rule to the tenant IP Office routing profile for Avaya SBC to know where to forward an arrived SIP message. A routing profile is used to specify a next-hop for the SIP message, along with other criteria that can be used to make a routing decision. Avaya SBC automatically routes responses back to the server that sent the corresponding request.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Configuration Profiles Routing.
    STEP RESULT:
    The EMS server displays the Routing Profiles page.
  3. For the to-tenant-IPO routing profile, click Edit.
  4. Click Add at the right side of the tab to add the new next hop.
  5. In the URI group field, select tenant1-URI-group.
  6. Click Add.
  7. In the Priority/Weight field, enter 1.
  8. In the SIP Server Profile field, select tenant1-IPO.
  9. Select the TCP address.
  10. Click Add.
  11. In the Priority/Weight field, enter 2.
  12. In the SIP Server Profile field, select tenant1-IPO.
  13. Select the UDP address.
  14. Click Finish.