Use this procedure to assign an IP address for Avaya SBC to communicate with the tenant network. This IP address is assigned to the A1 VLAN interface for the tenant.
On the EMS web interface, in the navigation pane, click SBC.
In the navigation pane, click Network & Flows Network Management.
STEP RESULT:
The EMS server displays the Network Management page.
On the Network Management page, click the Networks tab.
Click Add.
In the Name field, enter tenant1_network.
In the Gateway field, enter 192.168.101.1.
In the Subnet mask field, enter 255.255.255.0.
In the Interface field, select the VLAN interface created in the earlier section.
