Creating a tenant signaling interface

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the interface for SIP signaling using the available network configuration. This interface enables SIP sessions to take place.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & Flows Signaling Interface.
    STEP RESULT:
    The EMS server displays the Signaling Interface page.
  3. Click Add.
  4. In the Name field, enter SM1_tenant1.
  5. In the IP address field, select 192.168.101.10 and select the VLAN interface created in the earlier section.
  6. In the TCP Port field, enter 5060.
  7. Click Finish.