Configuring server flow for carrier trunk

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the server flows for carrier trunk. After the definition of the carrier SIP trunk, Avaya SBC needs to know its relation to the tenants so that packets can flow between them.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & FlowsEnd Point Flows.
    STEP RESULT:
    The EMS server displays the End Point Flows page.
  3. Click Server Flows.
  4. In the Flow Name field, enter carrier-to-IPO.
  5. In the SIP Server Profile, select carrier-SIP-trunk.
  6. In the Received Interface field, select B1-trunk-sig.
  7. In the Signaling Interface field, select A2-carrier-sig.
  8. In the Media Interface field, select A2-carrier-med.
  9. In the Routing Profile field, select to-tenant-IPO.
  10. Use default values for the remaining fields.
  11. Click Finish.