Configuring the tenant network for remote workers

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the tenant network for communicating with the SIP server. For that, Avaya SBC needs an address on A1.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & FlowsNetwork Management.
    STEP RESULT:
    The EMS server displays the Network Management page.
  3. On the Network Management page, click the Networks tab.
  4. Click Add.
  5. In the Name field, enter A1-tenant-RW.
  6. In the Gateway field, enter 172.26.10.1.
  7. In the Subnet mask field, enter 255.255.255.192.
  8. In the Interface field, select A1.
  9. In the IP address field, enter 172.26.10.17.
  10. Click Finish.