Configuring server flow for tenant trunk server

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the server flows that are types of endpoint flow in SIP trunking. You must specify the defined server and tenant relation for Avaya SBC so that packets can flow between them.
Before you begin
Define a flow for routing SIP requests from the tenant to the call server. The corresponding responses will automatically be routed back to the endpoint from which they came (the tenant1 trunk server, for example).
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & FlowsEnd Point Flows.
    STEP RESULT:
    The EMS server displays the End Point Flows page.
  3. Click Server Flows .
  4. Click Add.
  5. In the Flow Name field, enter tenant1_to_server.
  6. In the SIP Server Profile, select tenant1_trunk_server.
  7. In the Received Interface field, select SM_SIPServer1.
  8. In the Signaling Interface field, select SM1_tenant1.
  9. In the Media Interface field, select Med_tenant1.
  10. In the Routing Profile field, select SIPServer1_routing.
  11. Click Finish.