Configuring a tenant routing profile for carrier trunk to IP Office

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the tenant routing profile for carrier trunk to IP Office. Avaya SBC is between the trunk and the SIP server. When a SIP message arrives from the SIP server, Avaya SBC must know where to forward the message. A routing profile specifies a next-hop for a SIP message, along with other criteria that the system can use to make a routing decision.
Note that all tenants will use the created profile, and when you add tenants to Avaya SBC, you must add next-hop rules to this profile to support them.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Configuration Profiles Routing.
    STEP RESULT:
    The EMS server displays the Routing Profiles page.
  3. Click Add.
  4. In the Profile Name field, enter to-tenant-IPO.
  5. Click Next.
  6. In the Transport field, select TCP.
  7. Click Finish.