Creating server flow for IP Office

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to create the server flow for IP Office. When SIP arrives from IP Office that is intended for the PSTN, Avaya SBC needs to know how to perform that action. In this example, all IP Office tenants use the same interface for trunk access, so anything arriving on this interface should go to the carrier trunk.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & Flows End Point Flows.
    STEP RESULT:
    The EMS server displays the End Point Flows page.
  3. Click Server Flows.
  4. In the Flow Name field, enter tenant1-IPO-to-carrier.
  5. In the SIP Server Profile, select tenant1-IPO.
  6. In the Received Interface field, select A2-carrier-sig.
  7. In the Signaling Interface field, select B1-trunk-sig.
  8. In the Media Interface field, select B1-trunk-med.
  9. In the Routing Profile field, select to-carrier-trunk.
  10. Use default values for the remaining fields.
  11. Click Finish.