Configuring the tenant network

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to assign an IP address for Avaya SBC to use for communicating with the tenant network. This IP address is assigned to the A2 VLAN interface for the tenant.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & Flows Network Management.
    STEP RESULT:
    The EMS server displays the Network Management page.
  3. On the Network Management page, click the Networks tab.
  4. In the Name field, enter tenant2_network.
  5. Click Add.
  6. In the Gateway field, enter 192.168.102.1.
  7. In the Subnet mask field, enter 255.255.255.0.
  8. In the Interface field, select tenant2_vlan.
  9. In the IP address field, enter 192.168.102.10.
  10. Click Finish.