Creating a tenant signaling interface for IP Office trunk

Last Updated : May 29, 2023 |
Prolog information
Metadata
Keywords:
Use this procedure to configure the signaling interface to support SIP signaling with the tenant IP Office for traffic to and from the carrier trunk. In Avaya SBC, this interface groups an IP address and network interface with TCP and UDP signaling ports.
  1. On the EMS web interface, in the navigation pane, click SBC.
  2. In the navigation pane, click Network & Flows Signaling Interface.
    STEP RESULT:
    The EMS server displays the Signaling Interface page.
  3. Click Add.
  4. In the Name field, enter B1-trunk-sig.
  5. In the IP address field, select 192.168.1.20 and select the B1-tenant-IPO network.
  6. In the TCP Port field, enter 5060.
  7. In the UDP Port field, enter 5060.
  8. Click Finish.