reset ip-stations

Last Updated : Aug 02, 2023 |
Use reset ip-stations to simultaneously unregister and reset all IP endpoints on a system, or a certain group of IP stations. You can limit the reset to only IP phones, to IP phones in a specific network region, to all IP endpoints in a specific network region, or within a range of ip addresses. Each defined IP station receives a reset message and is unregistered.
Use reset ip-stations to initiate simultaneous firmware upgrades to many IP stations, or a certain group of IP stations. You can reset IP stations on one ip-network region to prevent overloading a system with large numbers of IP station resets.
Prolog information
Metadata
Keywords:

Syntax

reset ip-stations

reset ip-stations field descriptions

Field
Description
Reset Type
Specify the type of IP phones that you want to reset:
  • ip-phones: Resets IP phones.
  • tti: Resets phones in TTI state.
  • unauthenticated: Resets all unauthenticated IP stations.
  • all-ip: Resets all IP endpoints.
  • set-type: Resets a specified IP phone type. Enter the phone type in the Phone Type field.
  • status: Verifies if the reset ip-stations command is completed in the background.
Phone Type
Specify the phone model of the IP phones that you want to reset.
The system displays this field when you set the Reset Type field to set-type.
Reset Type Option
Specify whether you want to reset the IP phones in a particular network region, all network regions, or within an IP address range:
  • ip-address: Resets IP endpoints within an IP address range.
  • ip-network-region: Resets IP endpoints in specified IP network region.
  • all-region: Resets IP endpoints in all IP network regions.
Starting IP Address
Specify the starting IP address of the range in which you wan to reset the IP phones.
The system displays this field when you set the Reset Type Option field to ip-address.
Ending IP Address
Specify the ending IP address of the range in which you wan to reset the IP phones.
The system displays this field when you set the Reset Type Option field to ip-address.
IP Network Region Number
Specify the IP network region in which you want to reset the IP phones.
The system displays this field only when you set the Reset Type Option field to ip-network-region.

reset ip-stations feature interactions

Network regions

When setting up IP-network regions, you must consider into account the number of IP endpoints assigned to each region. Network regions are associated with specific media processing resources. Administer IP-network regions to a size that DHCP and TFTP servers can handle, and limit the performance impacts of simultaneously resetting large numbers of IP stations.