status hardware-group

Last Updated : Apr 09, 2018 |
Use status hardware-group to see summary information about the active or last hardware group tests.
The information includes the number and percentage of maintenance objects tested, the percentage of tests passed/failed/aborted, the time elapsed since initiating the hardware group test, the specific hardware group test command (see test ipserver-interface) initiated, and the state (active/canceled/complete) of the hardware group test.
Prolog information
Metadata
Keywords:

Syntax

status hardware-group 

status hardware-group field descriptions

Field
Description
Hardware Group Command State
The state of a hardware-group command:
  • active — testing is in progress
  • canceled — testing has been canceled
  • complete — the command has completed and there is no testing going on.
Number of MOs Tested
The number of MOs in the specified group (see test ipserver-interface) that have had been tested by current hardware-group. This includes every MO that either was actually tested or was aborted due to resource contention.
Total Number of MOs to be Tested
The total number of MOs in the group that was specified in test hardware-group.
Percent Complete
A ratio of the number of MOs completed and the total number of MOs to test in the command.
Elapsed Test Time
The duration of the hardware-group test. If a test was canceled and then restarted this time excludes the cancel period. If hardware-group has finished it indicates the length of time it took to complete the command. The time is displayed as HH:MM:SS where HH is hours, MM is minutes, and SS is seconds.
Repetition Number
The number of iterations that have been completed corresponding to the ‘repeat’ or the ‘continuously’ option.
Percentage of Tests Passed
The percentage of tests that passed.
Percentage of Tests Failed
The percentage of tests that failed.
Percentage of Tests Aborted
The percentage of tests that were aborted.
Command
The hardware-group action/object and qualifiers that were entered.
Test Sequence
short/long.
Test Repetition
Displays either continuously or the keyword repeat along with the repeat value entered.
Output Options
Displays the selections that were chosen on the input screen: auto-page, background, or failures.
Hardware Options
Displays the selections that were chosen on the input screen (all-ports).