For configuring NAS archiving, SMB protocol version 2 and 3 is supported. SMB version 3 is more secured protocol and can be used for encryption.
Before you begin
Ensure you have the path, and user credentials of the file share created on the NAS.
Procedure
Login to Web Manager on the server hosting Media Manager.
Click Applications > Media Manager > Configuration.
Click Add.
Select NAS.
On the Add NAS Connector window:
Enter a Name for the NAS connector.
Enter the Path for the NAS connector. This is the path of the file share. The path must be in the format IP address/SharePath. For example: 148.147.54.1/Remote archive.
In the User Name For Fileshare field, enter the username to access file share.
In the Password For Fileshare field, enter the password for the username to access file share.
Use the Encrypt Recording setting to select whether recordings should be encrypted. Note, you cannot set Encrypt Recording back to NO after saving the connector.
If encrypted, recordings can only be replayed from IP Office menus. Recordings are unencrypted when downloading from an IP Office menu.
If unencrypted, you must ensure that access to recordings in the archive complies with local data protection and privacy requirements.
Click Test Connection. If connection is successful, click Create. Otherwise, check and adjust the settings as required.
To start using the connector for archiving, select the connector from the Active Connector field and click Update.
Result
Media Manager will regularly copy new recordings from the primary call storage folder to the archive storage.
