Find answers to your technical questions and learn how to use our products
Search suggestions:
This tab provides trace options for monitoring the system's DTE port.
Events
Description
DTE Events
Log the status of Flow Control, Modem Controls (Data Terminal Ready (DTR), Data Carrier Detect (DCD)), baud rate changes on the DTE port, and so on.
Packets
DTE Command Tx
Log the Hayes AT commands send out of the DTE interface.
DTE Command Rx
Log the Hayes AT commands received from the DTE interface.
DTE Filter Tx
Log serial data transmitted out of the DTE interface once connected.
DTE Filter Rx
Log serial data received from the DTE interface once connected.
DTE PPP Tx
Log Framed Point-to-Point Protocol (PPP) packets Transmitted to the DTE interface if the Hayes ATB0 option is set on the port.
DTE PPP Rx
Log Framed PPP packets received from the DTE interface if the Hayes ATB0 option is set on the port.
DTE V110 Tx
Log Framed V.110 packets received from the DTE interface if the Hayes ATB3 option is set on the port.
DTE V110 Rx
DTE V120 Tx
Log Framed V.120 packets received from the DTE interface if the Hayes ATB2 option is set on the port.
DTE V120 Rx
None of the trace options are enabled by default. See Defaulting the Trace Options.
Previous Topic
Next Topic
