Administering the MGC list

Last Updated : Jan 08, 2024 |
Prolog information
Metadata
Keywords:
You can administer the gateway with a list of up to 4 alternate resources (procr or Survivable Remote Servers) that it can connect to in the event of link failure. The MGC list consists of the IP addresses to contact and the order in which to re-establish the H.248 link.
Use this procedure to administer the MGC list.
  1. At the gateway’s Command Line Interface (CLI) type set mgc list ipaddress, ipaddress, ipaddress, ipaddress, where:
    ADDITIONAL INFORMATION:
    • The first element is the IP address of the primary procr (Duplicated servers).
    • The next three elements can be the IP addresses of other procr in the primary server’s configuration (Duplicated servers), or the Standard Local Survivable call engine on branch gateways.
  2. Reset the gateway with the reset mgp command.
    ADDITIONAL INFORMATION:
    Wait for the LEDs on the gateway and Media Modules to go out and the active status LEDs on the gateway to go on, indicating that the reset is complete.
  3. Check the MGC list administration with the show mgc command.
    ADDITIONAL INFORMATION:
    Look in the CONFIGURED MGC HOST section for the IP addresses of the alternate resources.