Shutting down Communication Manager Messaging application

Last Updated : Jul 05, 2018 |
Prolog information
Metadata
Keywords:
Use this procedure to gather the Communication Manager Messaging data and to shut down the Communication Manager Messaging application.
Note:
If you are not using the Communication Manager Messaging application, skip this procedure.
  1. To test Communication Manager Messaging after the backup:
    1. Note the number of a test voice mailbox.
    2. Note the number of the Communication Manager Messaging hunt group.
  2. Leave a message on the test mailbox that will be retrieved after the backup.
  3. On the computer, click StartRun to open the Run dialog box.
  4. Depending on your connection:
    • If you are directly connected to the Services port, type telnet 192.11.13.6, and press Enter.
    • If you are connected to the network, type telnet IPaddress and press Enter.
  5. Log in to the server.
  6. To shut down the Communication Manager Messaging application, type stop -s Audix, and press Enter.
  7. Type watch /VM/bin/ss and press Enter to monitor the shutdown.
    ADDITIONAL INFORMATION:
    When the shutdown is complete, you will see only the voice mail and audit processes.
  8. Press Ctrl+C to break out of the watch command.
  9. Type /vs/bin/util/vs_status and press Enter to verify that the Communication Manager Messagingapplication is shut down.
    ADDITIONAL INFORMATION:
    When the Communication Manager Messaging application is shut down, you will see voice system is down.