B100 DECT Base Station Configuration

Last Updated : May 29, 2020 |
  1. Using a browser, login to the configuration menus.
  2. Selected Network.
    1. Change DHCP/Static IP from DHCP to Static.
    2. Change the RTP port value from 50004 to match the minimum RTP port setting of the IP Office system (by default 40750).
    3. Change the RTP port range from 254 to a value that matches the upper values of the IP Office RTP port range.
    4. Click Save.
  3. Select Servers.
    ADDITIONAL INFORMATION:
    We need a server entry that matches the IP Office. This server entry is then selectable when we add the extension.
    1. Click Add Server.
    2. Set the Server Alias to a name that identifies its purpose, for this example, IP Office.
    3. Set the Registrar to match the FQDN of the IP Office.
      For this example, 192.168.0.180.
    4. Set the Primary Proxy to match the FQDN of the IP Office plus the SIP port being used.
      For this example, 192.168.0.180:5060.
    5. Set SIP Transport to TCP.
    6. Click Save.
  4. Select Extension.
    1. Click the Idx number of an unused extension slot (the Idx numbers are underlined).
    2. Set Extension to the required extension number, for this example 710.
    3. Set Authentication User Name to also match the extension number. This value is used for registration on the IP Office system.
    4. Set the Authentication Password to match the Phone Password set for the extension in the IP Office configuration.
    5. In the Server drop-down, select the server entry created for the link to the IP Office.
    6. In the Select Handset(s) table, select the connected B169 phone.
    7. Click Save.
  5. Select Home/Status.
    1. Click Reboot.
    2. Wait for the base station to restart. It flashes red for about 3 seconds and then returns to steady green.
    3. Make some test calls to and from the phone.
Related links
B169 Conference Phone